Toilet flanges are a necessary part of any home and are often overlooked. The flange connects your toilet to your home’s sewer system’s water supply and drain pipe. It allows up to 3 flush valves or bidets to connect in one bathroom, which is great for shared spaces.
If you’ve ever wondered what goes into installing a new toilet flange. This article will walk you through everything from choosing the correct parts through installation itself so that when it comes time for maintenance or repair work down the road. Well, then, we’ll say goodbye forever.
Choose the Right Flange
First, you must know that many different flanges are available. Each has advantages and disadvantages, so choosing one that best fits your needs is essential. Here are a few things to keep in mind when selecting an installation flange:
- Flange height. The toilet bowl should be at least 1/2 inch above the floor but at most 4 inches from ground level. An uncomfortable toilet can cause discomfort and inconvenience, so finding a suitable replacement or alternate fixture is essential. Upgrading to a jack-leg fixture may be a more comfortable and effective solution than the current toilet model.
- Flange size. Make sure that both ends meet up evenly before proceeding further. There could be some unevenness and leaks where water gets trapped between them when pressure builds up due to usage over time.
- Flange style. Flange style can vary depending on the type of fixture and the installation location. Different flange styles include standard, offset, and repair flanges. The right flange style ensures a secure and proper fit for your toilet installation.
Protect the Surface Around Your Toilet
You’ll need to protect the surface around your toilet. This will prevent any damage to the floor or walls, making cleaning up after a leak even harder.
Protect the Surface Around Your Toilet With A Plastic Drop Cloth. Before working on anything else, ensure no exposed metal is on your toilet. If you’re dealing with a metal surface that cannot be covered by plastic drop cloths, such as an old sink, use cardboard instead. This material is stronger and less prone to tearing compared to paper or fabric. The idea is to conceal the flange and prevent water damage to avoid rusting problems.
Prepare to Install the New Toilet Flange
Before you install the new toilet flange, make sure to read the instructions that come with it. If you need help with what to do, ask someone who does. The instructions will tell you how much water pressure to apply. Also, on how much force is required to push it into place. They may also include information about your toilet’s design. Where the old flange was located so they can easily fit the new one.
Before investing too much time or money into purchasing a replacement part, ensure it is compatible with your toilet. Your existing toilet seat could break off if there aren’t enough support posts holding up its weight. Properly securing hardware with enough bolts is crucial to ensure the structural integrity of your home. Insufficient bolt support can lead to collapses or damage when heavy objects are moved around on surfaces. Installing the correct number of bolts can prevent the need for a complete replacement of the hardware set.
Remove the Old Toilet Flange
You’ll first want to remove the old flange, which will be different from any other flange you have seen. To do this, remove any screws and nuts holding it in place. Use a wrench on each side of these fittings so they can be removed easily without breaking them or damaging your walls or flooring below them. Once all of these fittings are removed, carefully pull out whatever pipe was connected underneath when installing your new toilet (if applicable).
Use a hammer and breaker bar if necessary to break up any sealant that has built up over time around the base of your toilet bowl; this will allow for easier access when removing replacement pieces later on in this process!
Cut Away Any Debris
To remove the old flange, you’ll need to use a hacksaw to cut away any debris. Be sure not to damage any pipes while doing this! Once you’ve cleared all the debris and ensured there are no leaks, clean up your work area by wiping down surfaces with water from a hose or bucket.
Install the New Toilet Flange
To install the new toilet flange, you’ll need to ensure it is level with the floor. To do this, use plumb bobs or bubble levels to check that the toilet flange is centered on the floor and not too high or low.
If you have an engineering degree and feel particularly handy, you may also want to measure where each side of the new flange should be located to install your new toilet properly.
A new toilet flange is easy to install and can help fix many problems.
If you’re looking for a way to finish your bathroom remodel, adding a new flange is one of the best ways. This will ensure that the toilet works properly and allows for easy maintenance in the future if necessary. It also gives you peace of mind knowing there’s no leaking around where water gets through from another part of your house into your bathroom area!
A Perfectly installed Toilet
A perfect toilet flange has been installed correctly, meaning the mating surfaces of the two pieces are flush. This will prevent leaks and make sure your fixture doesn’t leak into a wall or floor.
Now you know how to install a new toilet flange. It should be easy for you to fix your toilet problems. Contact an expert if you are still trying to figure out how to install a new toilet flange. Professional plumbers like the plumbing company in Alabama can help you save time and money.
